PLM_CTRL configuration for i.MX8QXP

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

PLM_CTRL configuration for i.MX8QXP

跳至解决方案
958 次查看
Kazuma_Sasaki
Senior Contributor I

Hello,

From IMX8DXAEC.pdf (Rev.0):

pastedImage_2.png

pastedImage_3.png

Regarding ADDR field in PLM_CTRL register.

We can select the destination module via this field.

Which module we can select at this field? Could you teach me selectable value and destinations?

Best Regards,

Kazuma Sasaki.

标记 (2)
0 项奖励
回复
1 解答
898 次查看
Yuri
NXP Employee
NXP Employee

Hello,

  ADDR field is always set to default value, meaning that  we only support ISI output.

Regards,

Yuri.

在原帖中查看解决方案

0 项奖励
回复
3 回复数
899 次查看
Yuri
NXP Employee
NXP Employee

Hello,

  ADDR field is always set to default value, meaning that  we only support ISI output.

Regards,

Yuri.

0 项奖励
回复
898 次查看
Kazuma_Sasaki
Senior Contributor I

Hi Yuri,

I appreciate your support. I understood that we don't need set ADDR field. Is it right?

Best Regards,

Kazuma Sasaki. 

0 项奖励
回复
898 次查看
Yuri
NXP Employee
NXP Employee

Correct.

0 项奖励
回复