MIPI DSI PHY timing registers on i.MX7D

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

MIPI DSI PHY timing registers on i.MX7D

跳至解决方案
1,402 次查看
lauranao
Contributor I

Hi all,

We're using a MIPI DSI panel (Ilitek ILI9806E controller) connected to a i.MX7D based custom board.
We added support for our display in the mipi_dsi_samsung driver, but we don't fully understand how to adjust the following registers:

MIPI_DSI_PHYTIMING
MIPI_DSI_PHYTIMING1
MIPI_DSI_PHYTIMING2

The Reference Manual does not report much information on these registers. The commit that added those timings for the Truly display also doesn't disclose much about them.

Is there any tool/document explaining how to figure out these register values? What units are they?

Thank you for your support,

Laura

标签 (2)
1 解答
1,025 次查看
igorpadykov
NXP Employee
NXP Employee

Hi Laura

one can create service request to obtain additional details

https://community.nxp.com/docs/DOC-329745 

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

在原帖中查看解决方案

0 项奖励
1 回复
1,026 次查看
igorpadykov
NXP Employee
NXP Employee

Hi Laura

one can create service request to obtain additional details

https://community.nxp.com/docs/DOC-329745 

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

0 项奖励