MIPI CSI-2 length matching tolerance for iMX8M

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MIPI CSI-2 length matching tolerance for iMX8M

6,090 Views
m_vignesh
Contributor I

Hi, 

Our Camera board for iMX8M eval kit having some streaming issues.  The length matching tolerance will be as follows:

MIPI intra lane < 20mils

MIPI Data with respect to Clk < 60mils.

Is the problem may be on improper length matching ?

Please advice on the above, awaiting for the support..!!

Thanks 

Vignesh.

 

Labels (1)
0 Kudos
Reply
1 Reply

5,335 Views
igorpadykov
NXP Employee
NXP Employee

Hi Vignesh

one can check camera design layout considerations provided in

https://docs.toradex.com/102492-layout-design-guide.pdf 

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

0 Kudos
Reply