I have built imges for IMX6 sabersd board using the following commands.
#repo init -u git://git.freescale.com/imx/fsl-arm-yocto-bsp.git -b imx-3.10.53-1.1.0_ga
#repo sync
#source setup-environment build
#bitbake core-image-minimal
I need ssh server on the target, but it is not there in rootfs.
Can you guide, how to enable ssh server to built with "core-image-minimal".
So the local.conf must have the line
IMAGE_INSTALL_APPEND = " openssh "
?
Hello,
If the needed package (ssh) is not present in the conf/local.conf file - it will not be included in rootfs.
So - just try to add it Yourself ; in particular customers can try to build most full configurations
such "fsl-image-gui" and "fsl-image-qt5".
i.MX Yocto Project: How do I add an existing package to an image?
Have a great day,
Yuri
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------