hii,
i am installing the tcan4x5x canfd driver processor used is imx6ull,
i had apply cclk(can clock) of 40Mhz.in hardware it is external crystal oscillator,
how can i enable the clock in software?
one host clock given by spi interface.another clock for canfd i have to give.
Hi Pooja
one can look at tcan4x5x schematic and dts example
http://www.ti.com/lit/ug/sllu281a/sllu281a.pdf
linux/tcan4x5x.txt at master · torvalds/linux · GitHub
so except spi no other clocks are needed from i.mx side.
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------