I have a custom board with Imx6Q automative part,
I am running a video in loop , inside a temperature chamber at 60degreeC , when the processor temperature reaches above 95C the video freeze with Gstreamer crash ,
The processor is not locking up, I can rerun the script to play the video without power cycle but again when the temperature reaches near 95C the video Freeze.
If i run the video in ambient and if the processor temperature is maintained bellow 90 degree C , The video run fine without any issue,
Is there any suggestion or reason why the video freeze at this temperature.
Thanks and Regards
The driver of the temperature monitor is imx_thermal.c, you can adjust the upper limit temperature to 115°C, and then test it again.
Have a nice day!
Thank you Weidong, I hope you are taking about the passive trip limit?
however the temp reading I am getting from the sysfs
/sys/class/thermal_zone/temp gives 95 degree C and still it Freeze .