How to change imx8 registers

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

How to change imx8 registers

ソリューションへジャンプ
932件の閲覧回数
inigovicentewal
Contributor III

Hi,

I want to know JTAG_MOD in which mode is by default (Test mode to Debug mode) and how it can be changed.
Is it possible to get to the lowest level of the iMX8M mini board with the Dstream debugger or is there any restriction?

ラベル(1)
タグ(3)
0 件の賞賛
1 解決策
855件の閲覧回数
igorpadykov
NXP Employee
NXP Employee

Hi Iñigo

JTAG_MOD by default is low according to Table 64. i.MX 8M Mini 14 x 14 mm functional contact assignments

i.MX 8M Mini Applications Processor Datasheet for Consumer Products

Usage is described in Table 7. JTAG recommendations i.MX 8M Mini Hardware Developer’s Guide

and https://community.nxp.com/thread/480454 

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

元の投稿で解決策を見る

0 件の賞賛
1 返信
856件の閲覧回数
igorpadykov
NXP Employee
NXP Employee

Hi Iñigo

JTAG_MOD by default is low according to Table 64. i.MX 8M Mini 14 x 14 mm functional contact assignments

i.MX 8M Mini Applications Processor Datasheet for Consumer Products

Usage is described in Table 7. JTAG recommendations i.MX 8M Mini Hardware Developer’s Guide

and https://community.nxp.com/thread/480454 

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

0 件の賞賛