How to build Xen Hypervisor on imx8qm and flashing tool

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

How to build Xen Hypervisor on imx8qm and flashing tool

2,536 次查看
nakshatra_a
Contributor I

Hello,

         I am working on phyCORE-i.MX8 which is been customized from i.MX8QM emk board. Which tool dose the board support for flashing. Can I get the document on how to build the Xen Hypervisor on IMX8QM EMK.

0 项奖励
3 回复数

2,167 次查看
AldoG
NXP TechSupport
NXP TechSupport

Hello,

 

On how to flash your board I'll recommend you to take a look to the documentation provided by PHYTEC:

https://www.phytec.de/cdocuments/?doc=nTNtCQ

 

The instructions on how to configure the Yocto Project tools to build the image with Xen support can be found in the Yocto Project User's Guide or the Android User's Guide.

 

Also, it may be useful for you to take a look to the virtualization user guide

 

Hope this helps,

Best regards,

Aldo.

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

标记 (2)

1,821 次查看
Harish-Sam
Contributor II

Helpfull reply for XenSupport,Yocto Project Support and Board Up.

0 项奖励

2,167 次查看
diego2000
Contributor I

Does Android P9.0.0_2.3.0 (non automotive) support Xen? If no, is it possible to port in Xen support?

0 项奖励