Hi, everybody. I am developing with I.MX6Q sabresd based board and want to capture a GPIO interrupt from a video decoder chip. When I looked up the IMX6DORM, I found that the IRQs 98-111 are for GPIO interrupt sources and IRQs 90-97 are also for GPIO1. Can anyone tell me the differences between them? How do I configure the INT0-INT7 interrupt request?
Thanks!
Solved! Go to Solution.
Hi ZHOUNENG
GPIO1 INT0 means dedicated interrupt for GPIO1(0) signal. For interrupts example
please refer to attached gic sdk test with description in Chapter 4
Configuring the GIC Driver.
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi ZHOUNENG
GPIO1 INT0 means dedicated interrupt for GPIO1(0) signal. For interrupts example
please refer to attached gic sdk test with description in Chapter 4
Configuring the GIC Driver.
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi, igorpadykov, thank you for your help!