How to dynamically select antenna signal strength by using the KW38 BLE chip + UWB solution

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

How to dynamically select antenna signal strength by using the KW38 BLE chip + UWB solution

跳至解决方案
2,145 次查看
Guofred
Contributor III

Hi

We develop Bluetooth power amplifier + dual antenna switch as dual antenna support KW38 BLE chip.

1)How to dynamically select an antenna with high signal strength for Bluetooth communication

2) KW38+UWB demo code

would you like kindly help to share the related demo code or your comments, thanks.

Best regards.

Guofred

标签 (1)
0 项奖励
回复
1 解答
2,108 次查看
Ricardo_Zamora
NXP TechSupport
NXP TechSupport

Hello Guofred,

 

Hope you are doing well. I apologize for the inconvenience, but the UWB products are under NDA. Could you please contact your DBM for more information about the available resources?

 

If you are interested in one of the Development Kits or Modules (UWB Developer Resources) you would need to go directly with the Module Maker to know the process and the support that they can provide you.

 

Best Regards,

Ricardo

在原帖中查看解决方案

0 项奖励
回复
3 回复数
2,109 次查看
Ricardo_Zamora
NXP TechSupport
NXP TechSupport

Hello Guofred,

 

Hope you are doing well. I apologize for the inconvenience, but the UWB products are under NDA. Could you please contact your DBM for more information about the available resources?

 

If you are interested in one of the Development Kits or Modules (UWB Developer Resources) you would need to go directly with the Module Maker to know the process and the support that they can provide you.

 

Best Regards,

Ricardo

0 项奖励
回复
2,103 次查看
Guofred
Contributor III

Hi @Ricardo_Zamora ,

Ok, thanks for your kindly help.

 

Best regards.

Guofred

0 项奖励
回复
358 次查看
Bigsky
Contributor I

Hello Guofred

Have you find the proper SMD antenna for both Bluetooth and UWB? thank you very much.

标记 (1)
0 项奖励
回复