FXLS8471Q - Accelerometer motion detection function example code

取消
显示结果 
搜索替代 
您的意思是: 

FXLS8471Q - Accelerometer motion detection function example code

无评分

FXLS8471Q - Accelerometer motion detection function example code

Hi Everyone,

 

If you are interested in a simple bare metal example code illustrating the use of the accelerometer motion detection function, please find below one of my examples I created for the FXLS8471Q accelerometer while working with the NXP FRDM-KL25Z platform and FRDMSTBC-A8471 board.

 

The FXLS8471Q is set to detect motion exceeding 315mg for a minimum period of 40 ms on either the X or Y axis. Once an event is triggered, an interrupt will be generated on the INT1 pin:

 

void FXLS8471Q_Init (void)
{
  FXLS8471Q_WriteRegister(FT_MT_THS_REG, 0x85); // Set threshold to 312.5mg (5 x 62.5mg )
  FXLS8471Q_WriteRegister(FF_MT_COUNT_REG, 0x02); // Set debounce timer period to 40ms
  FXLS8471Q_WriteRegister(FF_MT_CFG_REG, 0xD8); // Latch enabled, motion detection enabled for X and Y axis
  FXLS8471Q_WriteRegister(CTRL_REG4, 0x04); // Motion interrupt enabled
  FXLS8471Q_WriteRegister(CTRL_REG5, 0x04); // Route motion interrupt to INT1 - PTD4
              
  FXLS8471Q_WriteRegister(CTRL_REG1, 0x29); // ODR = 12.5Hz, Active mode
}‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍

 

 

In the ISR, only the interrupt flag is cleared and the FF_MT_SRC (0x16) register is read in order to clear the SRC_FFMT flag in the INT_SOURCE register and deassert the INT1 pin, as shown on the screenshot below.

 

void PORTD_IRQHandler()
{
  PORTD_PCR4 |= PORT_PCR_ISF_MASK; // Clear the interrupt flag 
  IntSource = FXLS8471Q_ReadRegister(FF_MT_SRC_REG); // Read the FF_MT_SRC register to clear the SRC_FFMT flag in the INT_SOURCE register      
  EventCounter++;
}‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍

 

FXLS8471Q - Motion Interrupt.JPG

 

 

Attached you can find the complete source code. If there are any questions regarding this simple example code, please feel free to ask below. 

 

Regards,

Tomas

标签 (1)
附件
版本历史
修订号:
第3页 共3页
最后更新:
‎09-11-2020 06:14 AM
更新人: