S32K3

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

S32K3

2,291 Views
ye_jiawei
Contributor I

Now I am using the Ethernet of S32K344, and I need mac-to-MAC. I need TO ask NXP technical support for the connection of hardware. Could you please give me a mac-to-MAC case of K3?Thank you so much!!

0 Kudos
2 Replies

2,272 Views
lukaszadrapa
NXP TechSupport
NXP TechSupport

Hi,

You can take a look at this board:

https://www.nxp.com/design/software/development-software/evaluation-and-development-board-for-genera...

There’s either 100BASE-TX PHY DP83848C with RJ45 connector or it is possible to connect external board with PHY like https://www.nxp.com/design/development-boards/analog-toolbox/tja1101-automotive-ethernet-adapter-for...

… which is automotive 100BASE-T1.

 So, you can use it as a reference.

 In case of this board:

https://www.nxp.com/design/development-boards/automotive-development-platforms/s32k-mcu-platforms/fu...

… there’s connector for external PHY only.

 Also see the hardware design guidelines, there are some comments about ethernet interface:

https://www.nxp.com/webapp/Download?colCode=S32K3_HW-DesignPackage

 Regards,

Lukas

0 Kudos

2,251 Views
ye_jiawei
Contributor I

Thank you. I took care of it!

0 Kudos