HVBMS Reference Design Bundle start-up source code v0.9.1

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

HVBMS Reference Design Bundle start-up source code v0.9.1

ソリューションへジャンプ
1,067件の閲覧回数
john24
Contributor III

Hello,

At HVBMS Reference Design Bundle the start-up example was downloaded:

john24_0-1714599397013.png

However, in the downloaded files, there is no source code v0.9.1, but only the .pmpx and .html files were found. This version of firmware was pre-flashed into the S32K344 eval board, which is part of the HVBMS reference design bundle. The pre-flashed firmware image does appear functional, when all eval boards in the bundle were connected and powered up.

Please advise on where to obtain the v0.9.1 source code. Thank you.

 

John

タグ(2)
0 件の賞賛
返信
1 解決策
929件の閲覧回数
john24
Contributor III

Thank you, VaneB, we will focus on updating/flashing the RD-K344BMU eval board with HVBMS-RD Bring-up Example 1.0.2, which we are able to build with NXP DS 3.5.

Thanks!

元の投稿で解決策を見る

0 件の賞賛
返信
8 返答(返信)
1,045件の閲覧回数
VaneB
NXP TechSupport
NXP TechSupport

Hi @john24 

Check the following thread. It has information related to the topic that you can find useful. 

HVBMS_StartUp_FreeMASTER.elf

 

B.R.

VaneB

0 件の賞賛
返信
1,043件の閲覧回数
john24
Contributor III

Hi VaneB,

I checked the thread that you referred to, however, it still does not point us anywhere to locate the actual v0.9.1 source code of the Bring_Up example project software.

As described in my original post, this v0.9.1 software was pre-flashed onto the RD-K344BMU board, which came with the RD-HVBMSCTBUN evaluation kit. What we would like to do, is to obtain this v0.9.1 software, to see how we can build it using the NXP Design Studio toolset.

Please advise. Thank you.

 

0 件の賞賛
返信
1,012件の閲覧回数
VaneB
NXP TechSupport
NXP TechSupport

Hi @john24 

As is mentioned in the shared thread if you already registered your kit, you can find the packages with the demos for HVBMS-RD Bring-up Example version 0.9.1 in your software account. 

My NXP Account > Software Licensing and Support > Software accounts > Automotive SW - HV-BMS Reference Kit Software > HVBMS - RD Bring-Up Example >  HVBMS-RD - Bring-up Example 0.9.1 S32K344 Design Studio. Also, you can find it with the Product Search (My NXP Account > Software Licensing and Support > Software accounts > Product Search) as "HVBMS-RD - Bring-up Example 0.9.1 S32K344 Design Studio". 

0 件の賞賛
返信
980件の閲覧回数
john24
Contributor III

Hi VaneB,

Thank you for the detailed instructions for downloading the v0.9.1 example Bring_Up example source code. However after importing the project into our NXP DesignStudio, double-clicking on the .mex file, led to the error of:

john24_0-1715010467424.png

Our NXP DS version is:

john24_1-1715010497178.png

Please advise...Thank you.

 

0 件の賞賛
返信
977件の閲覧回数
VaneB
NXP TechSupport
NXP TechSupport

Hi @john24 

The software was developed using RTD version 2.0.0, supported by S32DS 3.4. So, download this IDE version or install the corresponding RTD version (S32K3 Standard Software > Automotive SW - S32K3/S32M27x - Real-Time Drivers for Cortex-M > S32K3 Real Time Drivers Version 2.0.0). 

NOTE: the functionality of the software in a different tool version is not guaranteed. 

0 件の賞賛
返信
973件の閲覧回数
john24
Contributor III

Thank you again, VaneB, for the good information. We will consider downgrading what we already downloaded and installed, RTD v3.0.0/NXP DS v3.5, in order to get the v0.9.1 Bring_Up example project going.

In the meanwhile, do you see any issue if we update/flash the RD-HVBMSCTBUN eval kit, specifically the RD-K344BMU eval board in it, to the newer version of Bring_Up example found in 'SW32K344_HVBMS-RD_Bring-up_Example_S32DS_1_0_2_D2401.zip'?

Please advise. Thank you.

0 件の賞賛
返信
931件の閲覧回数
VaneB
NXP TechSupport
NXP TechSupport

Hi @john24 

The HVBMS-RD Bring-up Example 1.0.2 was tested using RTD 3.0.0, so, you should not have any problems with this software version.

0 件の賞賛
返信
930件の閲覧回数
john24
Contributor III

Thank you, VaneB, we will focus on updating/flashing the RD-K344BMU eval board with HVBMS-RD Bring-up Example 1.0.2, which we are able to build with NXP DS 3.5.

Thanks!

0 件の賞賛
返信