We need to configure the ECC for the Program flash Memory,
Please share reference and application code for configure the ECC for the Flash memory
I tried below steps
1) Set FERCNFG with 02 in the Main
2) Set the Bit FDFD to check whether interrupt generates or not.
I am not able see Status bit is getting changed and Interrupt is not generated
Thanks and regards
Yes, that is correct.
It might take a few instructions before the flag is set.
This is because of the core architecture.
If you want the flag to be asserted immediately, disable the write buffer:
S32_SCB->ACTLR |= S32_SCB_ACTLR_DISDEFWBUF_MASK;
I don't have access to the S32K148 EVB right now, unfortunately.
But I tested in on other S32K1xx parts and it works as expected.
Can you test it with this simple code?