S32DS Debug error

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 
868件の閲覧回数
Wanyj
Contributor I

Hi,

When I use S32DS for S32 Platform, the following error occurs when I use S32 Debug Probe for debugging.

Wanyj_0-1700557693972.png

Here is my configuration,I'm using the latest version S32DS for S32 Platform.

Wanyj_1-1700557781646.png

Wanyj_2-1700557788826.png

Wanyj_3-1700557798535.png

Wanyj_4-1700557882244.jpeg

I tried to restart the software and development board, but nothing worked,Hope you can answer, thank you

 
0 件の賞賛
返信
1 解決策
839件の閲覧回数
Miguel04
NXP TechSupport
NXP TechSupport

Hi @Wanyj 

From your other questions, I'll asume you are using the RDB2, is this correct?

I would like to discard that the boot mode is in the correct configuration

You can find this information on the following file, go to documentation and look for the user guide.

S32G-VNP-RDB2 reference design – User Guide

Miguel04_0-1700670457021.png

Help me verifying the configuration according to the chapters 3.1 Default Switch Setting and 3.6 Switch Setting for Serial Boot from the guide.

Please let me know.

Best Regards, Miguel.

元の投稿で解決策を見る

0 件の賞賛
返信
3 返答(返信)
852件の閲覧回数
Miguel04
NXP TechSupport
NXP TechSupport

Hi @Wanyj 

Are you facing the same issue with another examples provided under the RTD? For example, a LED blinky project.

Please let us know.

Best Regards, Miguel.

0 件の賞賛
返信
844件の閲覧回数
Wanyj
Contributor I

Hi,Miguel04

Yes, I have tried other examples, each one has this problem, when I change the development board does not have this problem,Nothing else has been changed.

Is there some kind of unknown error with my development board? Something's wrong with me.

Looking forward to your reply, thank you

0 件の賞賛
返信
840件の閲覧回数
Miguel04
NXP TechSupport
NXP TechSupport

Hi @Wanyj 

From your other questions, I'll asume you are using the RDB2, is this correct?

I would like to discard that the boot mode is in the correct configuration

You can find this information on the following file, go to documentation and look for the user guide.

S32G-VNP-RDB2 reference design – User Guide

Miguel04_0-1700670457021.png

Help me verifying the configuration according to the chapters 3.1 Default Switch Setting and 3.6 Switch Setting for Serial Boot from the guide.

Please let me know.

Best Regards, Miguel.

0 件の賞賛
返信