On building m7bootloader source code issues using s32g3-2023-02 ver IRE sw stack

[fengxianeric]

To query compiling issues,

C:\NXP\Integration_Reference_Examples_S32G3_2023_02\code\framework\realtime\swc\bootloader\platforms\S32G3XX\build>CALL configuration.bat
make/validation.mak:40: *** SDHC_STACK_PATH variable is not configured correctly. At least one MemDal SDHC block has been defined. Stop.

C:\NXP\Integration_Reference_Examples_S32G3_2023_02\code\framework\realtime\swc\bootloader\platforms\S32G3XX\build>

-------------------------

about related variables in launch.bat,

SET TRESOS_DIR=D:/EB/tresos

SET MAKE_DIR=D:/cygwin64

SET GCC_DIR=D:/ipcfInstall/NXP/S32DS.3.5/S32DS/build_tools/gcc_v9.2

SET TOOLCHAIN=gcc

SET CORE=m7

SET SRC_PATH_DRIVERS=C:/NXP/SW32_RTD_4.4_4.0.0/eclipse/plugins

SET SDHC_STACK_PATH=D:/ipcfInstall/NXP/S32DS.3.5/S32DS/software/PlatformSDK_S32XX_4_0_0/stacks/sdhc

SET TRESOS_WORKSPACE_DIR=D:/EB/tresos/workspace/Bootloader_S32G3XX_ASR_4.4_M7/output

SET HSE_FIRMWARE_DIR=C:/NXP/HSE_FW_S32G3_0_2_16_1

[Daniel-Aguirre]

Hi,

For the specific version you are using, "launch.bat" file is not the one to be configured. The file "configuration.bat" should be the one you configure.

As for the first command, since "configuration.bat" was not configured, we suppose that is the reason of the error under the SDHC path.

Please, let us know.