Depth of the RXOUT FIFO in S32G2 LLCE

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

Depth of the RXOUT FIFO in S32G2 LLCE

跳至解决方案
356 次查看
AsmId
Contributor III

Dear NXP community,

I would like to know the depth of the RXOUT fifos in S32G2 LLCE module.

I've found in the user guide only the information about the width (19bits) but not the depth (number of elements).

Thank you for your support.

Best regards,

 

标记 (2)
0 项奖励
回复
1 解答
241 次查看
Daniel-Aguirre
NXP TechSupport
NXP TechSupport

Hi,

We apologize for the delay. We have received the following confirmation:

"

All FIFOs have a depth of 16, including the RXOUT FIFO.

"

Please, let us know.

在原帖中查看解决方案

5 回复数
335 次查看
Daniel-Aguirre
NXP TechSupport
NXP TechSupport

Hi,

We might be misunderstanding the overall inquiry. If so, we do apologize.

For the available information, RXOUT should be of size 16+6, as seen under the LLCE User Guide:

DanielAguirre_0-1717698559494.png

Again, we apologize if we misunderstood your request.

Please, let us know.

0 项奖励
回复
314 次查看
AsmId
Contributor III

Hi @Daniel-Aguirre ,

Thank you for your reply. I thought that 16+6 is the number of RXOUT FIFO but not the number of elements (depth) in each of this FIFO.

Best regards,

 

0 项奖励
回复
242 次查看
Daniel-Aguirre
NXP TechSupport
NXP TechSupport

Hi,

We apologize for the delay. We have received the following confirmation:

"

All FIFOs have a depth of 16, including the RXOUT FIFO.

"

Please, let us know.

208 次查看
AsmId
Contributor III

Thank you for your feedback.

0 项奖励
回复
299 次查看
Daniel-Aguirre
NXP TechSupport
NXP TechSupport

Hi,

Thanks for your feedback. It seems that we misunderstood the inquiry, we do apologize.

We will confirm the depth of each FIFO, if available.

We apologize for any delay from our side.

Please, let us know.

0 项奖励
回复