Hi,
I have a NXP s32k144 EVB, it works normal. Now i designed my own S32K144 board, and i have tried Multilink to debug it. it is OK. However, the Multilink is shared. So i want to use EVB's JTAG interface( J12, SDA jtag interface).
First, i pick out the U7, U10 to make openSDA disconnect with the EVB S32k144 chip, then i tried the J12 interface with my new s32k144 board, the "P&E connection assistant" window occurs, it says "an error occurs while connecting to the interface hardware" the openSDA can be recognized.
Then i picked out the S32K144 chip from the EVB board. But the S32DS IDE still can not debug. the error is the same.
So i want to know what should i do to make it work as a JTAG. i have read the link
"Using the Freedom Board as SWD Programmer". Thank you.
Regards,
Yanpo, li
