Hello to everyone.
I think there is a difference between document(UM11396 ,section 7.5 "Insulation resistance measurement") and code(RD9Z1_638_BJB_CAN_demo_V2.0) related to switch control ,
when we got measure the insulation resistance , resistance values changes continuously
Is there a any software update available with this problem?
Is there anything I'm doing wrong or missing?
Hello Muhammed,
I do apologize for the delay in answering your question. I have already asked the responsible application engineer to look into it and get back to you ASAP.
Best regards,
Tomas
Hello Mohammed,
Unfortunately not yet. I have just sent a fourth reminder to the AE and hope that he will answer ASAP.
Please accept our apologies for the delay and any inconvenience this may have caused.
Best regards,
Tomas
Hello Mohammed,
According to the AE, there is a new version (2.1) of the RD9Z1_638_BJB CAN Demo Software available at the following website with insulation resistance measurement running correctly: https://www.nxp.com/design/designs/high-voltage-battery-junction-box-reference-design:RD9Z1-638BJBE...
Please test it out and in case of any problems, please let me know.
Best regards,
Tomas
Hello @TomasVaverka
The version I'm using is the same and I'm having problems.
Could you please check the private message?
Best regards,
Muhammed
I have the same issue with the Rev 2.1 version