LAMA's S12XE unofficial examples

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

LAMA's S12XE unofficial examples

LAMA's S12XE unofficial examples

I've just went through my PC and put some examples here. ( I made them "a few" days ago.)

The files are presented with extension BMP because of some firewals.

 

AN3490.pdf

DOC-XEP100-MMC-Memory_Map-Common_Map-V5_0-MSExcel.xls

EEE.xls

TN263-CodeWarrior IDE.pdf

XEP100 - EEPROM Direct Access - CW45.zip

XEP100 - Initial data in Emulated EEPROM - CW47.zip

XEP100 - MPU - CW47.ZIP

XEP100 - RAM addressing - CW45.zip

XEP100 - SCI - XonXoff_poll - CW47.zip

XEP100 - Security + Backdoor Key Access - CW47.zip

XEP100-ATD wakes up from STOP - CW47.zip

XEP100-ATD-ATDandXGATEandSharedRAM-CW50.zip

XEP100-ATD-CH1toCH4-CW47.ZIP

XEP100-ATD-CH1toCH8-CW47.ZIP

XEP100-ATD-Cntnuos_SingleCh-v1_0-CW47_Data.zip

XEP100-ATD-Tmprture_bandgapV-v1_0-CW47_Data.zip

XEP100-BDM-BDMcommExample-CW50.zip

XEP100-BufferRAMasOneArray-CW51.zip

XEP100-BufferRAMasRAMonly-CW51.zip

XEP100-CAN-CAN0-RxTxIsrLoopback-CW47.zip

XEP100-CAN-CAN0-TxAtXGATE-CW51.zip

XEP100-CAN-CAN0CAN1 - CW45.ZIP

XEP100-CAN-CAN2CAN2-Identifiers SandX-loopback-CW51.zip

XEP100-CAN-CAN2CAN3-CW47.ZIP

XEP100-CAN-CAN2CAN3-FILTER-CW51.ZIP

XEP100-CAN-CAN2CAN3-Identifiers SandX-CW51.zip

XEP100-CAN-LoopbackInterrupt-CW51.zip

XEP100-CAN.ZIP

XEP100-CAN0 - CAN1 - CW45.ZIP

XEP100-CAN0-RxTxIsrLoopback-CW47.zip

XEP100-CAN0-RxTxIsrLoopbackXGATE-CW51.zip

XEP100-CAN0-TxAtXGATE-CW51.zip

XEP100-CRG-COP-CW47.ZIP

XEP100-CRG-PLL-Setup-CW47.zip

XEP100-EBI-MRAM256x16-CS0-CW51.zip

XEP100-EBI-MRAM256x16-CS2-CW51.zip

XEP100-ECT-ECTasPWM-CW47.zip

XEP100-ECT-FreqMeasurement-CW51.zip

XEP100-ECT-InputCapture-CW51.zip

XEP100-ECT-TIM.ZIP

XEP100-EEEPROM-Addressing-Lukas-CW46.zip

XEP100-EEEPROM-DataPlacement-CW51.zip

XEP100-EEEPROM-plusMPU-CW51.zip

XEP100-EEPROM-DirectAccess-CW51.zip

XEP100-EXBUS-EXRAM256x16-CS1-CW47.zip

XEP100-EXBUS-ExRam_MR2A16ACYS35-CS1-CW51.ZIP

XEP100-FLASH-PFLASH-CW47.ZIP

XEP100-FLASH-PFLASH-CW51.ZIP

XEP100-FLASH-PFLASH-PFlashInitData.zip

XEP100-FLASH-PFLASH_reading-CW47.zip

XEP100-GPIO-PJ2isr-CW47.zip

XEP100-GPIO-PortPisrXgate-CW51.zip

XEP100-ID-readPartID-CW47.zip

XEP100-IIC-Master4Flash24C16-CW51.zip

XEP100-INT-INTERRUPTNUMBER-CW51.ZIP

XEP100-INT-TRAPPROC-CW51.ZIP

XEP100-MDDC-delay generator-v1_0-CW47.zip

XEP100-MPU-MPU-CW47.ZIP

XEP100-PFLASH-CW47.ZIP

XEP100-PFLASH-CW51.ZIP

XEP100-PIM-PTPfunctions1-CW47.zip

XEP100-PIT-FLOATING PERIOD-CW51.ZIP

XEP100-PIT-SERIAL_DATA_OUT-CW45.ZIP

XEP100-PIT-XGATE-SEMAPHORES-CW51.ZIP

XEP100-PWM-dutyatXGATE-CW47.zip

XEP100-RAM-addressing-v1_0-CW51.zip

XEP100-RAM-RAMaddressing-CW45.zip

XEP100-SCI_PIT-CW47.zip

XEP100-SCI-ECHO-isr.zip

XEP100-SCI-ECHOatCPU-CW47.zip

XEP100-SCI-ECHOatCPUisr-CW47.zip

XEP100-SCI-ECHOatXGATEisr-CW47.zip

XEP100-SCI-Sci0transmitterOnXGATE-CW45.zip

XEP100-SCI-SciTx-CW45.zip

XEP100-SCI-SCI_PIT-CW47.zip

XEP100-SCI-XonXoff_poll-CW47.zip

XEP100-SciTx-CW45.zip

XEP100-SECURITY-BackdoorKeyAccess-CW47.zip

XEP100-STOP-ATDwakesUp-CW47.zip

XEP100-STOP-RTIwakesUp-CW51.zip

XEP100-STOP-WakeUp-CW47.zip

XEP100-STOP_and_ API_and_PLL-CW47.zip

XEP100-STOP_and_XIRQ_and_PLL-CW47.zip

XEP100-TIM-10msIsr-CW47.zip

XEP100-TIM-FreqMeasurement-CW51.zip

XEP100-UnionInPages.zip

XEP100-UnionInPagesAndECT.zip

XEP100-XGATE-SharedVars-CW51.zip

XEP100PWM-PWM8bit-CW45.zip

XEP100_SPI_master_w_25AA256.zip

XEQ384EXBUS-EXRAM256x16-CS2-4000-7FFF-CW47.zip

XEQ512-PWM-10kHz8bit100point-CW51.zip

XEQ512-RAM-addressing-v1_0-CW51.zip

XEQ512-SWtrigger-CPU_XGATE-CW47.zip

XET256-ECT-asPWM-CW47.zip

XET256-ECT-OC-CW47.ZIP

XET256-EXBUS-ExROM2ExRAM-CW46.zip

XET256-RTI-RTIdec and COP-v1_0-CW47.zip

XET256-SCI-Tx_Poll-CW51.zip

XF256-SCI-ECHOatCPUisr-CW47.zip

XF256-SCI-ECHOatXGATEisr-CW47.zip

XF256-SCI-ECHOatXGATEisr-CW47.zip

Attachments
Comments

Hello Lama,

thanks for your examples, which are very helpful for my development. However, only S12XE-002.ZIP is available now. Could you please share S12XE-001.ZIP?

Best regards

Xingqiu

Hi,

I have updated it more times and the system was unable to accept file 001. it was there for a few days and then it was blocked.

Now I have changed the extension to bmp. Just rename it to zip and unpack.

Best regards,

Ladislav

zqh

Hi,lama:

how can I find de S12XE-001.ZIP after you rename it?I need it.

Best regards,

HZQ

Hi,

I have scaned the file and tried to put it back again.

We will see what firewall of community system will say because it hates some kind of files.

Best regards,

Ladislav

It was cleared again. I am working on it.......

The colleague of mine removed all obj files and some redundant files which can be created by make file command and suddenly it is accepted....

Hi Dear Lama,

When I try to program PFLASH, it's always something wrong.

Refer to your examples and other documents, Is the launch command function ONLY can be run in RAM memory?

If yes, then Why?

Thanks a lot

Great Job, Lama!

No ratings
Version history
Last update:
‎10-26-2020 12:52 AM
Updated by: