I already have a NXP K-64 board installed. What would be needed to get to compatibility with Rapid IoT Studio ? Video is obvious. What kind of video connection is the Rapid IoT Prototyping kit using ?

取消
显示结果 
搜索替代 
您的意思是: 

I already have a NXP K-64 board installed. What would be needed to get to compatibility with Rapid IoT Studio ? Video is obvious. What kind of video connection is the Rapid IoT Prototyping kit using ?

1,073 次查看
randyseedle
Contributor III

I already have a NXP K-64 board installed. What would be needed to get to compatibility with Rapid IoT Studio ? Video is obvious. What kind of video connection is the Rapid IoT Prototyping kit using ?

标签 (1)
0 项奖励
1 回复

952 次查看
Sebastian_Del_Rio
NXP Employee
NXP Employee

Hi Randy, I hope you're doing well!

 

All available information relating to the design, schematics and board designs for the NXP Rapid IoT Prototyping Kit can be found in the enablement section of its product page.

 

Could you please take a look at these files to see if they contain the information you are looking for?

 

Please let me know if you need any more information.

 

Best regards,

Sebastian

0 项奖励