Watchdog on P1020RDB-PC board in U-Boot

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

Watchdog on P1020RDB-PC board in U-Boot

612 次查看
shubhasingh
Contributor I

Hi,

I want to enable watchdog functionality on P1020RDB-PC board, i had enabled watchdog support in u-boot, some of the undefined errors were coming while compilation, i had resolved them, after flashing this u-boot, i am able to see "Watchdog enabled" message coming in u-boot log, but i am not able to get watchdog triggered, i had tried the patched mentioned under freescale community thread "how to set watchdog on P1020 custom board " but still no progress.

Please point me out how can i trigger a reset from u-boot in P1020RDB-PC board.

Regards,

Shubha

标签 (1)
0 项奖励
回复
1 回复

412 次查看
bpe
NXP Employee
NXP Employee

If your u-Boot really do enable hardware watchdog, then following this from the thread you referred should result in reset:

Re: how to set watchdog on P1020 custom board

Otherwise, debug your code to check if it actually enables e500 watchdog.


Have a great day,
Platon

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

0 项奖励
回复