Which board has....:

[joe_K]

Hey guys,
I'm looking for an ARM9 based development board, which must have:
32bit ARM9 MPU
Ethernet (10M as minimum),
USB (Host and device)
2 or 3 serial ports
LEDs and buttons
Linux support
better would it be if it has been assembled with a TFT LCD (3.5" or bigger") and come with pre-configured tool chain, binaries and source code.

Someone who has experience with such a thing please give me some recommendation, Thanks in advance

[joe_K]

Thanks, but....
$2999.00 ??
GOD, I don't think I can afford that.
Any other ?

[fabio_estevam]

You can also check MX27 Lite kit: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX27LITEKIT&nodeId=0162468rH31143297...

and also phyCORE-i.MX27 RDK: http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-ARM9-i.MX27.html

Regards,

Fabio Estevam

[leon2008]

The taskit Panel-Card seems good.
And beside this, the MINI2440 + LCD from http://www.developmentboard.net fits your requirements too,

Samsung S3C2440 (ARM920T) MPU
64M SDRAM, 64MB NAND flash, 2M Nor Flash
32bit data bus
ethernet, 2 x USB, 3 x serial port
3.5" LCD....

Euro200 only

check them out, might be interesting

[fabio_estevam]

You could try MX27ADS board:  http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MCIMX27ADSE&fsrch=1

Regards,

Fabio Estevam