MPC5744P toolbox display error on the SIMULINK library

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

MPC5744P toolbox display error on the SIMULINK library

862件の閲覧回数
guoping
Contributor I

Hello  MBD team

 when I install the MBD toolbox for MPC57xx,  3.2.0,  

the toolbox has no contents on the Simulink browser like below picture shown.  can you help me and guide me how to solve this problem?

 

mbd.png

 

 

0 件の賞賛
返信
2 返答(返信)

827件の閲覧回数
guoping
Contributor I

Thank you, my issue has solved.  but I encountered another issue,  I can't find anywhere to change the Clock of the MPC5744p system on the below picture.  

guoping_0-1654052258640.png

 

0 件の賞賛
返信

844件の閲覧回数
stefancinipeanu
NXP Employee
NXP Employee

Hello, @guoping 

You can try to press F5 key to refresh the Simulink Library Browser and if a pop-up showed like in the picture below, you have to select the second option: Generate repositories in memory.

 

stefancinipeanu_0-1653555759912.png

Hope this helps!

Best regards,

Stefan.

0 件の賞賛
返信