MPC5746R Safety Manual SM_107 & SM_108

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

MPC5746R Safety Manual SM_107 & SM_108

1,027件の閲覧回数
zhouxx
Contributor I

Hi:

   I will develop the MPC5746R safety-related application.

  pastedImage_1.png

How to use CRC calculated PIT configuration.What is One FTTI in this description

0 件の賞賛
3 返答(返信)

898件の閲覧回数
petervlna
NXP TechSupport
NXP TechSupport

Hello,

You SW will compare the CRC made under your PIT configuration (lets say offline)  with the actual one every one FTTI.

FTTI is Fault Tolerant Time Interval

regards,

Peter

0 件の賞賛

898件の閲覧回数
zhouxx
Contributor I

Hi,Peter:

   thanks for your reply,which register is that need CRC calculate?PIT_MCR and PIT_LDVAL?

pastedImage_1.png

pastedImage_2.png

0 件の賞賛

898件の閲覧回数
petervlna
NXP TechSupport
NXP TechSupport

Hello,

which register is that need CRC calculate?PIT_MCR and PIT_LDVAL?

You should monitor any register which is relevant for your counter functionality.

For example if you are using PIT0 then monitor its registers content.

regards,

Peter

0 件の賞賛