ADC wrong reading MPC5748G

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

ADC wrong reading MPC5748G

651件の閲覧回数
medhedibasly
Contributor III

I get wrong reading of voltage from the ADC, for exemple the voltage on the adc pin is 0.720v and the the adc is getting 1.020v

2 返答(返信)

496件の閲覧回数
davidtosenovjan
NXP TechSupport
NXP TechSupport

Hi, do you have chosen reference voltage you expect (3.3V/5V) ?

pastedImage_1.png

495件の閲覧回数
medhedibasly
Contributor III

Thank you for your reply, the issue was related to a hardware implementation on my board, the voltage divider was influenced by the some command signal related to  a transistor that changed the voltage divider gain value used on software.
i corrected the schematic and the problem disappeared.