* Detailed Description:
* This example shows, how to use interrupt hardware vector mode. In the example
* PIT3 and PIT2 interrupts are implemented. PIT interrupt toggle LED every second.
*
*
* This example also shows, how to implement IVOR exceptions for core 0.
* IVOR1 handler with while(1) loop is ready to use.
*
*
* For correct HW vector mode setup, following files was added to the project:
*
* - exceptions.s
* - handlers_vle.s
* - HW_vector.c
*
*
* Following files has been modified (all changes are marked by comment):
*
* - 56xx_flash.ld
* - Vector.c
* - MPC57xx__Interrupt_Init.c
*
* Following file was removed from project (files are still place in project, but
* not compiled and linked)
*
* - intc_sw_handlers.S
* - intc_SW_mode_isr_vectors_MPC5744P.c
*
*
*
* Test HW: MPC567XADAT516, MPC567XEVBFXMB
* MCU: PPC5676RDMVY1 3N23A
* Fsys: 180 MHz
* Debugger: Lauterbach Trace32
* PeMicro USB-ML-PPCNEXUS
* Target: internal_FLASH (debug mode, release mode)
* EVB connection: User LED 1 connected to J241,
* User LED 1 connected to J242.
*
