********************************************************************************
* Detailed Description:
* Initializes eQADC module for differnential single scan mode (with choosen GAIN
* factor), converts specified command queue and displays results into terminal
* window when EOQ is reached.
* Differential analog input DAN0+:DAN0- needs to be connect externally between
* pins ANA_0 and ANA_1 to see some valid numbers.
* EVB potentiomenters can be used for the purpose.
* As differential mode has been used, eQADC does not required to be calibrated.
*
* ------------------------------------------------------------------------------
* Test HW: XPC567XKIT516 - MPC5674ADAT516 Rev.C, MPC567XEVBFXMB Rev.B
* MCU: PPC5674FMVYA264
* Terminal: 19200-8-no parity-1 stop bit-no flow control on eSCI_A
* Fsys: 264/200/150/60 MHz
* Debugger: Lauterbach Trace32
* PeMicro USB-ML-PPCNEXUS
* Target: RAM, internal_FLASH
* EVB connection: Potentiometers --> ADC inputs
* USER_DEV_RV2(J4-7) --> ANA_0 (J18-3) DAN0+
* USER_DEV_RV3(J4-8) --> ANA_1 (J18-4) DAN0-
*
* Buttons --> ADC triggers
* USER_DEV_1D(J4-2) --> TPU_A0 (J22-1)
********************************************************************************
