make sd card bootable fot ls1046ardb-pb

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

make sd card bootable fot ls1046ardb-pb

跳至解决方案
473 次查看
abd_94_31
Contributor II

Good moorning,

 

I built an image with yocto real time edge project.

My goal is to make a bootable sd card, so I want to start the board ls1046ardb-pb in SD boot mode.

I can see in my /deploy/images/ls1046ardb folder that I have a .wic image. However that image contains only device tree, kernel and rootfs. How can I add rcw firmware and u-boot.

Otherwise, Is there another method to format the SD card and deploy the different elements.

 

Thank you

标记 (1)
0 项奖励
回复
1 解答
422 次查看
abd_94_31
Contributor II

I finally resolve my problem.

It was only a problem of DIP switch ( see doc RTEDGEYOCTOUG_v2.7 chap 7.1).

The image .wic generated by yocto real time edge contains already RCW and u-boot image.

Thanks

在原帖中查看解决方案

0 项奖励
回复
2 回复数
423 次查看
abd_94_31
Contributor II

I finally resolve my problem.

It was only a problem of DIP switch ( see doc RTEDGEYOCTOUG_v2.7 chap 7.1).

The image .wic generated by yocto real time edge contains already RCW and u-boot image.

Thanks

0 项奖励
回复
425 次查看
June_Lu
NXP TechSupport
NXP TechSupport

Please refer to Real-time Edge Software User Guide

7.2 Building eMMC images for Layerscape platform

7.4 Deploying eMMC images with separate images on Layerscape Platform

You will find the path of RCW, U-boot and how to flash them.

Thanks

0 项奖励
回复