Hello,
In the TWR, SW-2\3 are used also to bypass the burned RCW.
How ? What bits in the RCW can be bypassed this way ?
Thank you,
Z.V
> In the TWR, SW-2\3 are used also to bypass the burned RCW.
Sorry, in which document this is stated?
Hi Ufedor,
For example:
S3.5 : 0 - NOR bank 0
1 - NOR bank 1
How does S3.5 affects the source from where u-boot runs ?
Who reads the position of the switches ?
Thank you,
Z.V
S3.5 is connected to the CPLD which controls MSb of the NOR Flash address.