How to bring up a card when the flash is blank, or the image is corrupted. How to boot cards from various boot mode when changed the RCW as requirements. This documentation will use LS1046ARDB as new board to realize the functions (all target board in the document is LS1046ARDB).
Content
Bring up LS1046A with CodeWarrior TAP
Boot up from the SD card
Compile PBL binary from RCW source file
Compile the PBL binary into firmware
Program the firmware into the target board (LS1046ARDB)
Boot up from the QSPI
Compile firmware from RCW source file
Program the firmware into the target board (LS1046ARDB)
Boot up from the eMMC
Enable the on board eMMC
Compile firmware from RCW source file
Program the firmware into the target board (LS1046ARDB)
