Hi everyone,
I'm designing a new board for LPC1768 and reading the documentation (and some post) I am not clear which components I must use for RTC (pins 16 and 18) for common use. I must use a crystal or oscillator? and if I use a crystal, it must be of 32.768Khz or 32Khz (according to datasheet)? Also in case to use capacitors, how I can know the correct value?
Thanks for your help
Solved! Go to Solution.
Hi @contr2889,
Thank you so much for your interest in our products and for using our community.
The Driving LPC1700/LPC1800/LPC4300 with EPSON Crystals document can help you solve your questions.
Hope it helps you. Please let me know if you have more questions about it.
Have a nice day.
Best regards,
Leonardo
Hi @_Leo_ Thaks for your reply
Hi @contr2889,
Thank you so much for your interest in our products and for using our community.
The Driving LPC1700/LPC1800/LPC4300 with EPSON Crystals document can help you solve your questions.
Hope it helps you. Please let me know if you have more questions about it.
Have a nice day.
Best regards,
Leonardo