KL25 consumption on Low Power modes with Freedom board

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

KL25 consumption on Low Power modes with Freedom board

跳至解决方案
961 次查看
antoineodonne
Contributor II

Hello,

I am trying to reach the datasheet consumption values with the Freedom eval board, but I don't manage it.

On the different low leakage stop mode I measure 2.8uA added in comparison to datasheets values, except on VLLS0 where I have 300nA added.

The fact that I get a closer result on VLLS0 make me think that there is no external leakage on the board, but the 2.8uA configuration for the other modes is still important. I guess I am wrong in the configuration and forget something to reach optimal value.

Do you have an idea of the potential source of that extra consumption?

In my code, I just disable watchdog and clock monitoring and go to the desired Stop mode.

Thank you for the help.

Antoine

0 项奖励
1 解答
514 次查看
apanecatl
Senior Contributor II

Hi Antoine, besides disabling the watchdog, there are some other things you need to take into consideration to achieve the power consumption figures depicted in the datasheet, please take a look at our Low power management application note for kinetis architectures:

http://cache.freescale.com/files/32bit/doc/app_note/AN4503.pdf

在原帖中查看解决方案

0 项奖励
1 回复
515 次查看
apanecatl
Senior Contributor II

Hi Antoine, besides disabling the watchdog, there are some other things you need to take into consideration to achieve the power consumption figures depicted in the datasheet, please take a look at our Low power management application note for kinetis architectures:

http://cache.freescale.com/files/32bit/doc/app_note/AN4503.pdf

0 项奖励