dear all,
My target board do not power up correctly, but i do not find any specification regarding the minimum or maximim rise time of VDD during power up.
Can someone address me the specification?
Thank you
Fabio
Solved! Go to Solution.
Hi FabioPacio,
I do not see that specific specification but will continue to look.
The Kinetis Peripheral Module Quick Reference (KQRUG.pdf) Rev 2 has a power domain section talking about filtering the power supply. I assume that filtering somewhat slows the power rail rise time.
The data sheet (K60P144M100SF2V2.pdf Rev3) section 5.2.4 has following:
I'd also recommend comparing your schematics to the TWR-K60D100M schematics (www.freescale.com/tower).
Regards,
David
Hi FabioPacio,
I do not see that specific specification but will continue to look.
The Kinetis Peripheral Module Quick Reference (KQRUG.pdf) Rev 2 has a power domain section talking about filtering the power supply. I assume that filtering somewhat slows the power rail rise time.
The data sheet (K60P144M100SF2V2.pdf Rev3) section 5.2.4 has following:
I'd also recommend comparing your schematics to the TWR-K60D100M schematics (www.freescale.com/tower).
Regards,
David