How to do In-system programming by UART in MPC5645S

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

How to do In-system programming by UART in MPC5645S

874 次查看
vikaskumarsingh
Contributor I

Hi,

I am setting looking for the solution for my production, in which  i have to flash code into MPC5645S on mounted board.

I want to use UART for this.

 

Please tell me if there is a way to do this.

 

regards

vikas

标签 (1)
0 项奖励
1 回复

528 次查看
TICS_Fiona
NXP Employee
NXP Employee

Hello Vikas

Currently we do not have any official bootloader for this part.  I can provide only a bootloader that I got from my colleagues. It could be a nice start point for you and you can reuse some code. It was written for MPC560xB/P/S.

And for MPC56xx issue, please post the question on this forum:

https://community.nxp.com/community/s32/mpc5xxx/content

Best Regards

Fiona Kuang

TIC - Technical Information Center

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Mark Correct button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

0 项奖励