Help in Using the MPC 555

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

Help in Using the MPC 555

1,175 次查看
jflores_666
Contributor I

Phytec Phycore MPC-555
CodeWarrior Development Studio MPC5xx edition v8.7
 

We are currently using the above stated setup in designing a senior project. We have been trying to get the QADC modules to work, but with no success. We want to bring in an analog signal and display the sampled value via the UART. We have been searching for Demos that would allow us to do this from the start, however there are no versions available that are compatible with our version of CodeWarrior. If anybody could send me some code or direct me where there are some functioning demos, your assistance will be much appreciated.

标签 (1)
标记 (1)
0 项奖励
回复
1 回复

511 次查看
J2MEJediMaster
Specialist I

There is an article in Steve Ciarcia's Circuit Cellar on building an oscilloscope using the QADCs on the MPC-555. The link is here. You will probably have to pay for the PDF, but the Google view of the article might show you if it's worth the expense.

 

---Tom

Message Edited by J2MEJediMaster on 2009-09-30 08:52 AM
Message Edited by J2MEJediMaster on 2009-10-01 09:14 AM
0 项奖励
回复