I have a question! Is the following initialization for my MC9S12XEP100 okay?
Because my SPI-Bus, which worked on my HC12 don't work on this new evaluation Board!?
/* Init for SPI Interface */
PTS |= 0x80;
DDRS = DDRS | 0xF0; /* outputs */
SPI0CR1 = 0x58; /* 0b01011000 */
SPI0CR2 = 0; /* Normal mode */
SPI0BR = 0x01; /* SPI clock */
I would appreciate it, if you could give me some help for my problem!