I have tested SCI 2 with debug.h on evaluation board - OK with code Warrior
On my board T2DX problem on MC9S08AC60 - Stlll High Receiver OK
Trasmiter - High level
only one difference - Package LQFP QFP
on the development board is there the standard RS232 driver - - - it inverts.
on your board did you directly connect the pin to the connector if so - - - check the settings for the SCI, and have the transmitter inverted - - - might need to do the same with the receiver setting.
I direct connect and invert both of these settings. - - - - Development board allows for providing and handling full RS232 levels.
Retrieving data ...