Magnus Lundell

MCF51QE/ I2C question

Discussion created by Magnus Lundell on Feb 9, 2010
Latest reply on Feb 10, 2010 by Magnus Lundell

Hello,

I am going to use the IIC-module on a MCF51QE32 and I was reading the in the reference manual page 267, about generating a start signal:  

Master Mode Select. The MST bit changes from a 0 to a 1 when a start signal is generated on the bus and master

mode is selected.

I dont understand this.. Shouldnt it be something like this:

Master Mode Select. When the MST bit changes from a 0 to a 1  a start signal is generated on the bus and master mode is selected.

 

Regards

 

Magnus

 

Outcomes