DEMO baord reboots when ethernet connect/disconnect with TCP/IP lite stack, why?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

DEMO baord reboots when ethernet connect/disconnect with TCP/IP lite stack, why?

Jump to solution
961 Views
TVNAIDU
Contributor III

I loaded CF TCP/IP stack, everytime when I connect/disconnect  ethernetm board reboots, does TCP/IP stack not stable?.

 

 

 


 .....COULD NOT ESTABLISH LINK.....

 

Running ColdFire TCP/IP-Lite stack Revision 3.1

Copyright 2008 by Freescale Semiconductor Inc.
Use of this software is controlled by the agreement
found in the project LICENSE.H file.
Built on Sep 29 2009 14:15:32

IP Address  = C0A80064 -> 192.168.0.100
Mask        = FFFFFF00 -> 255.255.255.0
Gateway     = C0A80001 -> 192.168.0.1

InterNiche ColdFireLite TCP/IP for ColdFire, v3.0

Copyright 1997-2006 by InterNiche Technologies.
All rights reserved.
Preparing device for networking
Ethernet started on Iface: 0

INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
100bT - Half Dup

 

Running ColdFire TCP/IP-Lite stack Revision 3.1

Copyright 2008 by Freescale Semiconductor Inc.
Use of this software is controlled by the agreement
found in the project LICENSE.H file.
Built on Sep 29 2009 14:15:32

IP Address  = C0A80064 -> 192.168.0.100
Mask        = FFFFFF00 -> 255.255.255.0
Gateway     = C0A80001 -> 192.168.0.1

InterNiche ColdFireLite TCP/IP for ColdFire, v3.0

Copyright 1997-2006 by InterNiche Technologies.
All rights reserved.
Preparing device for networking
Ethernet started on Iface: 0

INET>
100bT - Half Dup

 

Running ColdFire TCP/IP-Lite stack Revision 3.1

Copyright 2008 by Freescale Semiconductor Inc.
Use of this software is controlled by the agreement
found in the project LICENSE.H file.
Built on Sep 29 2009 14:15:32

IP Address  = C0A80064 -> 192.168.0.100
Mask        = FFFFFF00 -> 255.255.255.0
Gateway     = C0A80001 -> 192.168.0.1

InterNiche ColdFireLite TCP/IP for ColdFire, v3.0

Copyright 1997-2006 by InterNiche Technologies.
All rights reserved.
Preparing device for networking
Ethernet started on Iface: 0

INET>
100bT - Half Dup

 

Running ColdFire TCP/IP-Lite stack Revision 3.1

Copyright 2008 by Freescale Semiconductor Inc.
Use of this software is controlled by the agreement
found in the project LICENSE.H file.
Built on Sep 29 2009 14:15:32

IP Address  = C0A80064 -> 192.168.0.100
Mask        = FFFFFF00 -> 255.255.255.0
Gateway     = C0A80001 -> 192.168.0.1

InterNiche ColdFireLite TCP/IP for ColdFire, v3.0

Copyright 1997-2006 by InterNiche Technologies.
All rights reserved.
Preparing device for networking
Ethernet started on Iface: 0

INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
INET>
100bT - Half Dup

 

Running ColdFire TCP/IP-Lite stack Revision 3.1

Copyright 2008 by Freescale Semiconductor Inc.
Use of this software is controlled by the agreement
found in the project LICENSE.H file.
Built on Sep 29 2009 14:15:32

IP Address  = C0A80064 -> 192.168.0.100
Mask        = FFFFFF00 -> 255.255.255.0
Gateway     = C0A80001 -> 192.168.0.1

InterNiche ColdFireLite TCP/IP for ColdFire, v3.0

Copyright 1997-2006 by InterNiche Technologies.
All rights reserved.
Preparing device for networking
Ethernet started on Iface: 0

INET>

 .....COULD NOT ESTABLISH LINK.....

 

Running ColdFire TCP/IP-Lite stack Revision 3.1

Copyright 2008 by Freescale Semiconductor Inc.
Use of this software is controlled by the agreement
found in the project LICENSE.H file.
Built on Sep 29 2009 14:15:32

IP Address  = C0A80064 -> 192.168.0.100
Mask        = FFFFFF00 -> 255.255.255.0
Gateway     = C0A80001 -> 192.168.0.1

InterNiche ColdFireLite TCP/IP for ColdFire, v3.0

Copyright 1997-2006 by InterNiche Technologies.
All rights reserved.
Preparing device for networking
Ethernet started on Iface: 0

INET>
INET>
INET>

Labels (1)
0 Kudos
1 Solution
294 Views
vier_kuifjes
Senior Contributor I
See my reply in your other thread...

View solution in original post

0 Kudos
1 Reply
295 Views
vier_kuifjes
Senior Contributor I
See my reply in your other thread...
0 Kudos