工程师,你好!
我设计的KW36的电路板在Buck Mode(auto start)模式下无法使用SEGGER J-Link 下载程序。但通过短接J27,使VDD_BRD变为3.3V,才可以调试下载程序。下载好程序的KW36可以工作在Buck Mode(auto start),但仍然无法在该模式下下载程序。我的电路与 【FREEDOM KW36 Bluetooth Smart/Generic FSK】基本一致。
红叉部分未焊接。外围元件基本没焊。
错误提示如下,几乎和未连接到目标板的状态一样。
使用官方MCUXpresso IDE v11.1.1_3241编译调试。
以上
谢谢!
Hi, I hope you're doing well!
Could you please take a look at the DCDC Power Management document for the KW4x/KW3xA/Z/KW2xZ series of MCUs?
It provides detailed information on the different possible configurations for the DC-DC in these MCUs.
Please let me know if you need any more information.
Take care, best regards,
Sebastian