AnsweredAssumed Answered

U-boot start up from DRAM using Code Warrior

Question asked by hirobe motoharu on May 20, 2020
Latest reply on May 22, 2020 by Yiping Wang

I want to boot a custom board with T1014, but my boot device is not supported by Code Warrior flash programmer and u-boot cannot be written to the boot device. (MT29F4G SPI NAND Flash is mounted on the custom board.)
So, I want to boot u-boot from DRAM using JTAG. Is it possible to boot u-boot from DRAM using codewarrior?


thanks in advance.