AnsweredAssumed Answered

(MCU:MPC5605B)How to set emios0_ch[9] for receive PWM signal

Question asked by jian sun on May 14, 2020
Latest reply on May 15, 2020 by Petr Stancik

Dear friends,

I use MPC5605B for receiving PWM signal with emios0_ch[9], it can enter interrupt normally, but  EMIOSA[9] and EMIOSB[9] value is 0.

How to set the port, thanks!!!


the setting as below: 

EMIOS_0.CH[9].CADR.R = 0x00000000;

EMIOS_0.CH[9].CBDR.R = 0x00000000;

EMIOS_0.CH[9].CCR.R = 0x0E020685;