KE06 晶体电压

[haifeng_jin]

Hi  我在使用KE06的时候测试晶体的震荡电压峰值在1.2V，这个正常吗，datasheet上面没有说明的电气指标。

[nxf58904]

不客气，欢迎再次提问

Jianyu: 

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

[nxf58904]

Hi，

补充一下，幅值电压跟OSC_CR[HGO]也有关系，官方默认配置是Low power mode。

Jianyu: 

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

[haifeng_jin]

感谢

[nxf58904]

你好，晶体的峰值电压一般为Vcc一半低一点，只要能正常产生时钟，系统可以正常工作就可以。

Jianyu: 

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------