Setting pins to I2C mode enables push-pull mode by default, while open-drain mode is required for normal I2C operation.
Pins version: v7.0
Hope you are doing well. Could you please confim the microcontroller that you are using, so that I may check if it happens with others too.
MCU is Kinetis MKV58F1M0xxx24.
Currently the "electrical features" settings, such as open-drain, are not handled automatically in the Pins tool. Their adjustment now has to be done by user. Thank you for the feedback, we will consider this improvement for the next versions of the tool.
MCUXpresso config tools team
Retrieving data ...