where found the source code of emg_web_uploader.exe
for changing the IP port.
Hi, in order to execute the emg_web_uploader.exe there is a Make.bat file, if you open this file
with notepad, you will see the current IP , just change this IP and save the changes. Execute the .bat
excuse me for my English. I am French
As I have a lot http server on my reseau.
I programmed the bigibutler with address IP = 192.168.0.151 and port = 86
since emg_web_uploader.exe me répond:
Is for it that I search the sources of emg_web_uploader.exe
to be able to cross in parameter the numero of the port IP
emg_https_uploader (ip address) (ip port) (filename) (key)
Thank you Jaime R for your answer
http://st-medard-35.dyndns.org:86 to see my digitbutler
Sorry, I don't know if the source code is available for emg_web_uploader.exe . I also don't know if there is necesary to change the port or/and how to do it.
Can you ping the board from your PC?, Just to make sure that you have a connection working.
Thank you Jaime R
My link rs232 works perfectly of that I compiled the bigibutler in IP 192.168.0.151 port 80.
I can therefore recharge the file freescale_static_ffs.c
To resolve problem I took the file freescale_static_ffs.c (make with make_static.bat) in the directory web_page then copied out in the directory of plan \SW_Main_Board\src\projects\example\freescale_HTTP_Web_Server then I re-compiled the bigibutler in IP 192.168.0.151 port 86.
It is a tiring resolution !
It is for it that I like to cross in parameter the number of the port IP as emg_web_uploader.exe
Retrieving data ...