Hello. NXP Team.
I have a problem that I can not get low current in VLPS Mode.
Now I am using s32k118. And I did check below s32k datasheet.
s32k118 --> 26uA or 38 uA
So. I refer to below link
And I added below code.
* Disable UART in doze mode
* Disable FIRC, SOSC
* PMC->REGSC CLKBIASDIS = 1
* PMC->REGSC BIASEN = 1
But the Board is measured 20mA. I want to get a lower current(26uA).
Is there anything else I need to do?