Hi,
When I using S32K to communicate with FS4500 by SPI, there no any response to know whether the SPI is built. I use oscilloscope can watch the signals such as CLK, MOSI, PCS are OK. So I just want to know how to sovle this problem.
Thanks a lot!
Xinguang Wang
Solved! Go to Solution.
Hello Xinguang Wang,
Please refer the following community post.
Have a great day,
TIC
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------
Hello Xinguang Wang,
Please refer the following community post.
Have a great day,
TIC
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------