i.MX6DL I have a question about how to set AUDMUX on Sabresd board.
I connected the other device for transmit/received with audio codec. As shown below.
Refer to the AUDMUX chapter "Internal Network Mode Example 3" of the data sheet (IMX6SDLRM.pdf) and set the register as shown below.
int_port = int_port - 1; /* Port 2 */
Is the above register setting code right?
What is the status and direction of the Clock and Frame Sync signals when communicating with other devices and wm8962 devices? ( The signals of AUD4_RXC and AUD4_RXFS in the Other Device are input. )
Please help me.
In addition, should the device connected to Port 5 in the Internal Network Mode example (Figure 16-8. Block Diagram For Example 3) be a SSI master device ?