AnsweredAssumed Answered

NXP MCU Boot Utility error

Question asked by Anuj Tanksali on May 16, 2019
Latest reply on May 18, 2019 by Jay Heng



Am using the iMXRT1064 EVK board. I was not able to program the board due to some issue so i used the MCU boot utility to recover the access to the board. I have tried this procedure earlier with success so my settings are correct on the utility (see attached snapshot 1.png ). But now am facing some issues. After i perform the step connect to ROM the Vendor-ID and Product-ID change automatically (see attached snapshot 3.png). I am not able to perform further steps and erase function on the utility fails. I get "HAB Disabled" error on command line (see attached snapshot 4.png) Please help me out with this issue.


Please let me know if there is any other way or any other utility to recover the board.